substitue for a injector pulley??

[Mtn_Dew]

what do you use to pry up the injectors? i dont want to buy a freaking pulley thing ma jigger

[Alchemist]

http://autorepair.about.com/od/fixit...j-instal_4.htm

no trick, just be careful

[YourcarFTL]

Pry bar and a rag. thats how i've done it. If i'm pulling an injector, there is something wrong with the O-Ring allready so tearing one isn't a big deal. just make sure to be ready to grab it when it pops out.

[Mtn_Dew]

Originally Posted by Alchemist

http://autorepair.about.com/od/fixit...j-instal_4.htm

no trick, just be careful

that site says use the puller also, there damn expensive too

[Mtn_Dew]

Originally Posted by YourcarFTL

Pry bar and a rag. thats how i've done it. If i'm pulling an injector, there is something wrong with the O-Ring allready so tearing one isn't a big deal. just make sure to be ready to grab it when it pops out.

feels like mine are superglued in, couldnt even pop it out with pliers

[YourcarFTL]

Originally Posted by Mtn_Dew

feels like mine are superglued in, couldnt even pop it out with pliers

i used a pry bar lol. pliers won't do it.

[laserspeeddemon]

I use my fingers....

[VertigoPills]

Originally Posted by laserspeeddemon

I use my fingers....

Probably only works if you applied anti-seize when installing them

[YourcarFTL]

Originally Posted by VertigoPills

Probably only works if you applied anti-seize when installing them

no......... most injectors don't come out very easily. Some you can pull out with your hands. others not so much.

[estricklin]

I've always just popped e'm out with my fingers.