B3ND3R
06-04-2009, 10:29 PM
all right the good news is i have a turbo and almost the rest of the kit, but the thing of it is...
is i wondering if the 420a stock engine can handle it. plus the car is auto, still havent switched it to stick
mb90nash
06-08-2009, 07:46 AM
the motor will handle it. hate to tell you but you cant just "Switch it to manual", theres a good amount of work to be done and if you don't know everything it entails then i wouldn't even think about it. auto trans will handle it, i've seen it done several times.
B3ND3R
06-09-2009, 01:48 PM
yeah but wouldnt i have to tone it waaaaaaay down to like 6 psi
cuz its a stock 420a block?
laserspeeddemon
06-09-2009, 02:03 PM
The 420A is completely unfamiliary to me. If this guy put on a turbo kit himself, he will be able to put in a Manual.
B3ND3R
06-09-2009, 02:12 PM
but still, no one has answered my question...
can my stock 420a engine handle a turbo, and at what psi?
mb90nash
06-09-2009, 03:44 PM
i said it COULD, thats the key word, and you could do 8 to 10 psi roughly. but i still wouldn't push for 12 psi without some better internals. thats just me tho. i'm not saying it can't be pushed to 12 psi, i'm just saying i wouldn't without upgrade.
in all reality, you'd be better off with a GSX motor and trans because the GSX motor is already turbocharged. i mean if i was putting that much money in it i'd do it right
manybrews
06-10-2009, 03:35 PM
dont waste your time.
Just sell it and buy a turbo eclipse.
ObseSSed
06-10-2009, 03:50 PM
Any car can handle a turbo, that's the short answer. Whether it will handle a certain boost is another.
manybrews
06-10-2009, 09:43 PM
or you can do the smart thing and buy the car engineered for a turbo, instead of pretending you can do the same without the millions of dollars the engineers spent on making the turbo car reliable.
B3ND3R
06-16-2009, 02:09 AM
well everything under the hood is stock cept the intake but that dosent matter one bit.
its a stock auto tranny and stock everything.
people are tellin me that it will blow my tranny my header, my block everything
Scribs
06-16-2009, 02:55 AM
I have seen some sick 420a engines. Most kits on stock blocks are around 6psi until they build it up. switching to a stick should of been your first "mod" before the turbo. Or, doing a 6 bolt swap with a full GSX convert.
at least you dont own a 99 eclipse.
at least you dont own a 99 eclipse.
whats wrong with 99? that was the best year yo.
B3ND3R
06-16-2009, 11:59 AM
so i will be good all stock under the hood.
as long as i tune the psi to 6?
sounds good:rockon:
vBulletin® v3.5.8, Copyright ©2000-2009, Jelsoft Enterprises Ltd.
Copyright ©2005-2007 CarForums.net. All Rights Reserved